DELCOM VISUAL INDICATOR DRIVER

The buzzer will go on and off for the number of times specified by this parameter. This makes me happy. Recently I have just started working on a new project and as we were blessed with a build server and a mostly working build I was reminded of this project that had been put on the back burner. This parameter is used to distinguish between multiple indicators. Typical current consumptions are shown in the table below:. Features such as LED flashing and intensity may be controlled.

Uploader:	Mikinos
Date Added:	5 May 2015
File Size:	31.29 Mb
Operating Systems:	Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads:	32266
Price:	Free* [*Free Regsitration Required]

This makes me sad. The bottom entry is a best for pole mount or surface where a hole is available for the wire to feed thru the delvom.

The code required to integrate the light to the build monitor was actually the simplest bit of code in the whole thing. The block inherits the sample time by default.

I chose to set up the following fields for each colour light: The buzzer is stopped on a rising insicator at this input. The intensity of the blue LED as a fraction between Check this option to enable the internal switch to clear the LEDs whenever it is pressed.

With this simple task out of the way I could set up individual methods to update the appropriate hashes in Redis. The duration for which the buzzer will be off when triggered, in seconds. The changes I needed to make were: The buzzer is actuated via software control.

Delcom Products Inc - USB HID Traffic Lights

It requires Node 4. This makes me happy.

Getting the build status Of course, this was only part of the indicagor. In Redishashes can have individual fields changed making it fairly easy to work with.

Rather than starting from scratch I chose to extend the existing example code as it was already working well. The resolution of the flash on and off times, as well as the flash phase delays, is determined at model start in order to provide the best accuracy possible for the requested times.

Test with RunKit Report a vulnerability. This library is known to work on Mac and Linux platforms where node-hid can be installed.

Genuine Delcom 904007-s USB HID Rgy/blink Visual Signal Indicator

Importantly it means that the monitoring tools are well separated from the actual control of the light. The intensity of the green LED as a fraction between I had great plans to make it flash when I received a call on Lync, and to generally help me keep track of the health of the project I was working on.

There are three wire entry styles, they are; side, bottom and center. The intensity of the red LED as a fraction between There are three wire exit styles they are: BuildNumber ; break ; case BuildStatus.

Build notification light using Redis and a Delcom Visual Indicator

It is also possible to synchronize the flashing of the LEDs at any time. Buzzer on time tunable online. Use this option to read the switch. This parameter may be a scalar or vector.

The test opens an attached Delcom light and runs through the available functionality by turning it solid greed, red and blue and then flashing each color.

Delcom Visual Indicator :: QUARC Targets Library

This time I approached it with a far more pragmatic mindset and just wanted to get something working. If inidcator intensity is zero then the LED will be turned off.

This is what the light can do: